As the Summer months are fast approaching, BCsystems has put together a quick guide to help committee members, on site managers and owners prepare your properties for the high-demand swimming pool season. Some quick things that can be checked include:
Keep your pool safety certificate up to date.
Pool safety certificates for shared pools expire every 12 months, and the pool must be reinspected and a new certificate issued. If you are unsure where your pool certificate is stored or cannot locate a copy, the Queensland Building and Construction Commission (QBCC) has a Pool Register (qbcc.qld.gov.au) search tool which can be used to check if a property has a pool registered, how many pools are registered, what the current expiry date is and even download a copy of the most recent certificate.
Install a CPR sign
It is a legal requirement in Queensland for all pools and spas to have a CPR resuscitation sign installed. All new CPR signs must comply with a new standard introduced in 2017. If your CPR sign is older than 2017, or if it is faded from the sun, consider replacing it to keep the pool area fresh and well-maintained.
Doing a self-audit
Check that:
- All pool gates close and latch correctly when released from any position (and don’t get stuck on any plants, ground or other obstacles
- Remove any rocks or other items which might be used to prop open the pool gates
- There should be no climbable plants or trees near the pool fence – if there are, consult with your committee about replacing those plants with something lower
- Replace any damaged or broken equipment so you can service the pool through summer
Furniture
If your furniture is OK for now, consider when it might be replaced next, and discuss adding that to your sinking fund budget with the committee.
COVID registration on entry
All the above items are positive and proactive actions that can be easily completed by on site managers and committees. Also consider:
A slip test of the common area tiles
Tile cleaning, sealing, polishing and general foot traffic can all contribute to a more slippery tile surface. It is not a good idea to assume that tiles will be compliant, unless they have been recently tested. Insurers are increasingly asking for this type of report too.
For a relatively low cost, the tiles can be inspected and tested using a specialist friction-testing machine. The good news is that if the tiles do not meet the standard, they can usually be treated with an acid-wash to increase the anti-slip properties without changing the look of the tiles and without replacing them. This is also relatively inexpensive considering the benefit.
References: Requirements for CPR and warning signs | Queensland Building and Construction Commission (qbcc.qld.gov.au)